how do you fix a washing machine that won't drain

Washing Machine Isn’t Draining? Follow These Tips to Fix and Prevent Drainage Issues

share this post

If your washing machine isn’t draining water properly after a cycle, you may be struggling with what to do about it. Fortunately, this is a common issue for many households, and with the right knowledge, it’s usually an easy fix. Let our expertise guide you through the typical problems and their solutions so you can get your washing machine back in action.

When Your Washing Machine Isn’t Draining: A DIY Guide

Dealing with a washing machine that won’t drain can be frustrating. Fortunately, several common issues can often be resolved with some DIY know-how.

Exceeding Washer Capacity: A Balancing Act

Overloading: A Simple Mistake with Big Consequences

One of the most straightforward reasons a washing machine isn’t draining is because it’s been overloaded. While it might seem efficient to stuff as many clothes as possible into a single load, this can actually lead to significant issues.

When a washer is overloaded, clothes don’t have enough space to move around freely. This not only affects the cleaning process but can also put extra strain on the machine’s motor and prevent water from draining out properly. The washer might struggle to spin, leave clothes excessively wet, or make unusual noises.

unclog a washing machine

Solution: Balance Your Loads

To address this, simply lighten the load. Make sure to distribute clothes evenly and don’t fill the drum more than three-quarters full. This ensures that clothes can move freely and water can drain as intended. Adhering to the recommended load size in your washer’s manual is also a good practice.

Preventing Future Issues

Regularly sticking to the proper load size and not overstuffing your washer will not only prevent drainage issues but also prolong the life of your machine.

Drain Hose Troubles: The Path of Water

The Common Culprit: Kinks and Clogs

Another frequent reason for drainage problems is issues with the drain hose. This hose might become kinked, twisted, or clogged, impeding the flow of water out of the machine.

A kinked hose is often the result of the washer being pushed too close to the wall or poor installation. On the other hand, a clogged hose can occur from an accumulation of lint, small clothing items (like socks), or other debris.

Fixing the Hose

First, pull the washer away from the wall to check for kinks. Straighten any bends in the hose. If the hose is clogged, you’ll need to detach it (make sure to have a bucket handy for any residual water) and clear out the obstruction. Running water through the hose can help ensure it’s completely clear.

Routine Hose Maintenance

Regularly inspecting and cleaning your drain hose will prevent future clogs and ensure your washing machine drains efficiently.

Clogged Drain Pump Filter: Hidden but Crucial

A Hidden Barrier to Efficient Draining

The drain pump filter, often overlooked, is a vital component in ensuring your washing machine drains correctly. Over time, this filter can become clogged with lint, coins, hairpins, and other small items, leading to drainage issues.

Clearing the Filter

  1. Locate the filter, usually found behind a small door at the front lower part of the machine.
  2. Place a towel and a shallow dish or pan under it to catch any spillage.
  3. Open the filter cover, remove the filter, and gently clean it under running water.
  4. Check the cavity for any additional debris before replacing the filter and cover.

Ongoing Filter Care

Regularly cleaning your drain pump filter every few months will keep your washing machine draining properly and prevent potential damage to the pump.

how to empty a washing machine full of water

When the Drain Pump Fails

The Heartbeat of the Drainage System

The drain pump in your washing machine is akin to the heart of the drainage system. If this pump is faulty or broken, the water in your washer won’t drain.

A failing pump may manifest as a humming sound without water movement, or no sound at all, indicating that the pump isn’t functioning.

Professional Assistance May Be Required

Repairing or replacing a drain pump is a more complex task. If you suspect your pump is the issue, it may be time to call in professionals, as this requires a bit more technical know-how and experience.

As you can see, many drainage issues with washing machines are solvable with a bit of DIY effort. However, if you find that your washing machine isn’t draining despite trying these fixes, or the problem is beyond your comfort zone, don’t hesitate to reach out to Masterminds of Appliances for expert washing machine repair services.

want to save on maintenance?

Check out our appliance maintenance deals & keep your appliances running longer.


Recent Posts

Sign up to receive your

$15 off coupon

and our monthly newsletter